What is the standard of medical protective clothing

What is the standard of medical protective clothing

This article is to introduce the standard of medical protective clothing, non-woven fabric type 1: ordinary PP non-woven fabric, 2: SMS non-woven fabric. 3: The thickness of the non-woven fabric is measured by the weight per square meter. The weight is in grams, such as 45 grams per square meter, 50 grams per square meter. The greater the number of grams, the thicker the non-woven fabric.

Standard for medical protective clothing

Surface moisture resistance

The water level on the outside of protective clothing shall not be lower than grade 3 in GB / t4745-1997.

breaking strength

The breaking strength of protective clothing sample should not be less than 45N.

elongation at break

The elongation at break of protective clothing sample is not less than 30%.

Medical protective clothing

Filtration efficiency

The filtration efficiency of protective clothing for non oily particles shall not be less than 70%

Flame retardant property

The protective clothing with flame retardant performance shall meet the requirements of grade B2 in GB 17591-1998.

Antistatic property

The charged capacity of protective clothing shall not be greater than 0.6uc.

Skin irritation

Protective clothing materials should be free from skin irritation

Microbiological indicators

The protective clothing should meet the requirements of microbiological index in GB15979-2002, as shown in Table 1. The protective clothing marked with "sterile" or "sterile" on the package shall be sterile.