Inspection of medical protective clothing

Inspection of medical protective clothing

The protective clothing with reliable quality should be selected according to the hazardous factors on site. Users should choose the type of protective clothing according to the workplace or possible hazards. In case of inflammable and explosive places, anti-static clothing should be selected, high-voltage shielding clothing and insulating clothing should be used for live working; airtight anti-virus clothing should be used for highly toxic substances contact operation; high-temperature working clothes should be used for high-temperature operation in front of the furnace.

1) The products with reliable quality shall be purchased through the exclusive labor insurance stores, and the varieties that have been inspected by professional and technical departments and conform to the current standards shall be purchased.

2) Preparation, correct wearing and maintenance before use.

Medical protective clothing

3) Quality inspection: the quality of protective clothing should be inspected according to the technical conditions of the product before purchase and use.

4) Familiar with performance: read the product description carefully, be familiar with its performance and precautions, and conduct necessary fitting training.

5) Wear according to the instructions.

6) We should pay attention to the use conditions of protective clothing and do not wear it beyond the limit.

7) After the use of special operation protection, it should be inspected, cleaned, dried and preserved, and reused next time. Products should be stored in a dry, ventilated and clean warehouse.

8) Protective clothing with rubber as base material can be washed with soap and water, washed and dried, and stored after scattering some talcum powder.

9) Plastic based protective clothing is usually only cleaned and dried at room temperature.

10) Protective clothing with special fabric as base material, such as high-voltage shielding clothing, microwave protective clothing and anti-static clothing, should be kept dry to prevent corrosion of corrosive substances and breaking of conductive fibers such as metal in the fabric. The electrical index of such clothing should be checked regularly.

Personal protective equipment inspection must also pay attention to:

1) Whether the production unit has "production license".

2) Whether the product has "product qualification certificate".

3) Whether the product meets the relevant quality requirements of the product.

4) Whether the specification and technical performance of the product are consistent with the protection requirements of the operation.