What is the standard for medical protective clothing

This article will introduce the standard of medical protective clothing, non-woven fabric type 1: ordinary pp non-woven fabric, 2: SMS non-woven fabric. 3: Laminated non-woven fabric, 4: Breathable non-woven fabric, the thickness is measured by the weight per square meter, the weight is in grams, such as: 45 grams/square meter, 50 grams/square meter, the greater the number of grams The thicker the woven fabric.

Surface moisture resistance

The water level on the outside of the protective clothing should not be lower than the level 3 requirements in GB/T4745-1997.

Breaking strength

The breaking strength of the protective clothing samples should not be less than 45N.

Elongation at break

The elongation at break of the protective clothing sample material is not less than 30%.

Filtration efficiency

The filtration efficiency of protective clothing for non-oily particles is not less than 70%

send feedback

history record

Flame retardant performance

Protective clothing with flame-retardant properties should meet the requirements of level B2 in GB17591-1998.

Antistatic

The electrical charge of the protective clothing should not be greater than 0.6uC.

Skin irritation

The protective clothing material should have no skin irritation

Microbiological indicators

Protective clothing should meet the requirements of microbiological indicators in GB15979-2002, see Table 1. Protective clothing marked with "sterilization" or "sterilization" or pictures on the packaging should be sterile.